/* ![[previous]](../icons/n_left.png)
![[next]](../icons/n_right.png)
![[first]](../icons/first.png)
![[last]](../icons/last.png)
![[top]](../icons/n_top.png)
![[bottom]](../icons/bottom.png)
![[index]](../icons/index.png)
![[help]](../icons/help.png)
*/
DEFINITIONS
This source file includes following definitions.
- ossl_sslctx_free
- ossl_sslctx_s_alloc
- ossl_sslctx_set_ssl_version
- ossl_call_client_cert_cb
- ossl_client_cert_cb
- ossl_call_tmp_dh_callback
- ossl_tmp_dh_callback
- ossl_call_tmp_ecdh_callback
- ossl_tmp_ecdh_callback
- ossl_ssl_verify_callback
- ossl_call_session_get_cb
- ossl_sslctx_session_get_cb
- ossl_call_session_new_cb
- ossl_sslctx_session_new_cb
- ossl_call_session_remove_cb
- ossl_sslctx_session_remove_cb
- ossl_sslctx_add_extra_chain_cert_i
- ossl_call_servername_cb
- ssl_servername_cb
- ssl_renegotiation_cb
- ssl_npn_encode_protocol_i
- ssl_encode_npn_protocols
- ssl_npn_select_cb_common
- ssl_npn_advertise_cb
- ssl_npn_select_cb
- ssl_alpn_select_cb
- ssl_info_cb
- ossl_sslctx_get_options
- ossl_sslctx_set_options
- ossl_sslctx_setup
- ossl_ssl_cipher_to_ary
- ossl_sslctx_get_ciphers
- ossl_sslctx_set_ciphers
- ossl_sslctx_set_ecdh_curves
- ossl_sslctx_get_security_level
- ossl_sslctx_set_security_level
- ossl_sslctx_session_add
- ossl_sslctx_session_remove
- ossl_sslctx_get_session_cache_mode
- ossl_sslctx_set_session_cache_mode
- ossl_sslctx_get_session_cache_size
- ossl_sslctx_set_session_cache_size
- ossl_sslctx_get_session_cache_stats
- ossl_sslctx_flush_sessions
- ssl_started
- ossl_ssl_shutdown
- ossl_ssl_free
- ossl_ssl_s_alloc
- ossl_ssl_initialize
- ossl_ssl_setup
- write_would_block
- read_would_block
- no_exception_p
- ossl_start_ssl
- ossl_ssl_connect
- ossl_ssl_connect_nonblock
- ossl_ssl_accept
- ossl_ssl_accept_nonblock
- ossl_ssl_read_internal
- ossl_ssl_read
- ossl_ssl_read_nonblock
- ossl_ssl_write_internal
- ossl_ssl_write
- ossl_ssl_write_nonblock
- ossl_ssl_stop
- ossl_ssl_get_cert
- ossl_ssl_get_peer_cert
- ossl_ssl_get_peer_cert_chain
- ossl_ssl_get_version
- ossl_ssl_get_cipher
- ossl_ssl_get_state
- ossl_ssl_pending
- ossl_ssl_session_reused
- ossl_ssl_set_session
- ossl_ssl_set_hostname
- ossl_ssl_get_verify_result
- ossl_ssl_get_client_ca_list
- ossl_ssl_npn_protocol
- ossl_ssl_alpn_protocol
- ossl_ssl_tmp_key
- Init_ossl_ssl
/*
* 'OpenSSL for Ruby' project
* Copyright (C) 2000-2002 GOTOU Yuuzou <gotoyuzo@notwork.org>
* Copyright (C) 2001-2002 Michal Rokos <m.rokos@sh.cvut.cz>
* Copyright (C) 2001-2007 Technorama Ltd. <oss-ruby@technorama.net>
* All rights reserved.
*/
/*
* This program is licensed under the same licence as Ruby.
* (See the file 'LICENCE'.)
*/
#include "ossl.h"
#if defined(HAVE_UNISTD_H)
# include <unistd.h> /* for read(), and write() */
#endif
#define numberof(ary) (int)(sizeof(ary)/sizeof((ary)[0]))
#ifdef _WIN32
# define TO_SOCKET(s) _get_osfhandle(s)
#else
# define TO_SOCKET(s) (s)
#endif
#define GetSSLCTX(obj, ctx) do { \
TypedData_Get_Struct((obj), SSL_CTX, &ossl_sslctx_type, (ctx)); \
} while (0)
VALUE mSSL;
static VALUE mSSLExtConfig;
static VALUE eSSLError;
VALUE cSSLContext;
VALUE cSSLSocket;
static VALUE eSSLErrorWaitReadable;
static VALUE eSSLErrorWaitWritable;
#define ossl_sslctx_set_cert(o,v) rb_iv_set((o),"@cert",(v))
#define ossl_sslctx_set_key(o,v) rb_iv_set((o),"@key",(v))
#define ossl_sslctx_set_client_ca(o,v) rb_iv_set((o),"@client_ca",(v))
#define ossl_sslctx_set_ca_file(o,v) rb_iv_set((o),"@ca_file",(v))
#define ossl_sslctx_set_ca_path(o,v) rb_iv_set((o),"@ca_path",(v))
#define ossl_sslctx_set_timeout(o,v) rb_iv_set((o),"@timeout",(v))
#define ossl_sslctx_set_verify_mode(o,v) rb_iv_set((o),"@verify_mode",(v))
#define ossl_sslctx_set_verify_dep(o,v) rb_iv_set((o),"@verify_depth",(v))
#define ossl_sslctx_set_verify_cb(o,v) rb_iv_set((o),"@verify_callback",(v))
#define ossl_sslctx_set_cert_store(o,v) rb_iv_set((o),"@cert_store",(v))
#define ossl_sslctx_set_extra_cert(o,v) rb_iv_set((o),"@extra_chain_cert",(v))
#define ossl_sslctx_set_client_cert_cb(o,v) rb_iv_set((o),"@client_cert_cb",(v))
#define ossl_sslctx_set_sess_id_ctx(o, v) rb_iv_set((o),"@session_id_context",(v))
#define ossl_sslctx_get_cert(o) rb_iv_get((o),"@cert")
#define ossl_sslctx_get_key(o) rb_iv_get((o),"@key")
#define ossl_sslctx_get_client_ca(o) rb_iv_get((o),"@client_ca")
#define ossl_sslctx_get_ca_file(o) rb_iv_get((o),"@ca_file")
#define ossl_sslctx_get_ca_path(o) rb_iv_get((o),"@ca_path")
#define ossl_sslctx_get_timeout(o) rb_iv_get((o),"@timeout")
#define ossl_sslctx_get_verify_mode(o) rb_iv_get((o),"@verify_mode")
#define ossl_sslctx_get_verify_dep(o) rb_iv_get((o),"@verify_depth")
#define ossl_sslctx_get_verify_cb(o) rb_iv_get((o),"@verify_callback")
#define ossl_sslctx_get_cert_store(o) rb_iv_get((o),"@cert_store")
#define ossl_sslctx_get_extra_cert(o) rb_iv_get((o),"@extra_chain_cert")
#define ossl_sslctx_get_client_cert_cb(o) rb_iv_get((o),"@client_cert_cb")
#define ossl_sslctx_get_tmp_ecdh_cb(o) rb_iv_get((o),"@tmp_ecdh_callback")
#define ossl_sslctx_get_sess_id_ctx(o) rb_iv_get((o),"@session_id_context")
#define ossl_ssl_get_io(o) rb_iv_get((o),"@io")
#define ossl_ssl_get_ctx(o) rb_iv_get((o),"@context")
#define ossl_ssl_get_x509(o) rb_iv_get((o),"@x509")
#define ossl_ssl_get_key(o) rb_iv_get((o),"@key")
#define ossl_ssl_set_io(o,v) rb_iv_set((o),"@io",(v))
#define ossl_ssl_set_ctx(o,v) rb_iv_set((o),"@context",(v))
#define ossl_ssl_set_sync_close(o,v) rb_iv_set((o),"@sync_close",(v))
#define ossl_ssl_set_hostname_v(o,v) rb_iv_set((o),"@hostname",(v))
#define ossl_ssl_set_x509(o,v) rb_iv_set((o),"@x509",(v))
#define ossl_ssl_set_key(o,v) rb_iv_set((o),"@key",(v))
#define ossl_ssl_set_tmp_dh(o,v) rb_iv_set((o),"@tmp_dh",(v))
#define ossl_ssl_set_tmp_ecdh(o,v) rb_iv_set((o),"@tmp_ecdh",(v))
static ID ID_callback_state;
static VALUE sym_exception, sym_wait_readable, sym_wait_writable;
/*
* SSLContext class
*/
static const struct {
const char *name;
SSL_METHOD *(*func)(void); /* FIXME: constify when dropping 0.9.8 */
int version;
} ossl_ssl_method_tab[] = {
#if defined(HAVE_SSL_CTX_SET_MIN_PROTO_VERSION)
#define OSSL_SSL_METHOD_ENTRY(name, version) \
{ #name, (SSL_METHOD *(*)(void))TLS_method, version }, \
{ #name"_server", (SSL_METHOD *(*)(void))TLS_server_method, version }, \
{ #name"_client", (SSL_METHOD *(*)(void))TLS_client_method, version }
#else
#define OSSL_SSL_METHOD_ENTRY(name, version) \
{ #name, (SSL_METHOD *(*)(void))name##_method, version }, \
{ #name"_server", (SSL_METHOD *(*)(void))name##_server_method, version }, \
{ #name"_client", (SSL_METHOD *(*)(void))name##_client_method, version }
#endif
#if defined(HAVE_SSLV2_METHOD)
OSSL_SSL_METHOD_ENTRY(SSLv2, SSL2_VERSION),
#endif
#if defined(HAVE_SSLV3_METHOD)
OSSL_SSL_METHOD_ENTRY(SSLv3, SSL3_VERSION),
#endif
OSSL_SSL_METHOD_ENTRY(TLSv1, TLS1_VERSION),
#if defined(HAVE_TLSV1_1_METHOD)
OSSL_SSL_METHOD_ENTRY(TLSv1_1, TLS1_1_VERSION),
#endif
#if defined(HAVE_TLSV1_2_METHOD)
OSSL_SSL_METHOD_ENTRY(TLSv1_2, TLS1_2_VERSION),
#endif
OSSL_SSL_METHOD_ENTRY(SSLv23, 0),
#undef OSSL_SSL_METHOD_ENTRY
};
static int ossl_ssl_ex_vcb_idx;
static int ossl_ssl_ex_store_p;
static int ossl_ssl_ex_ptr_idx;
static void
ossl_sslctx_free(void *ptr)
{
SSL_CTX *ctx = ptr;
#if !defined(HAVE_X509_STORE_UP_REF)
if(ctx && SSL_CTX_get_ex_data(ctx, ossl_ssl_ex_store_p)== (void*)1)
ctx->cert_store = NULL;
#endif
SSL_CTX_free(ctx);
}
static const rb_data_type_t ossl_sslctx_type = {
"OpenSSL/SSL/CTX",
{
0, ossl_sslctx_free,
},
0, 0, RUBY_TYPED_FREE_IMMEDIATELY,
};
static VALUE
ossl_sslctx_s_alloc(VALUE klass)
{
SSL_CTX *ctx;
long mode = SSL_MODE_ENABLE_PARTIAL_WRITE |
SSL_MODE_ACCEPT_MOVING_WRITE_BUFFER;
VALUE obj;
#ifdef SSL_MODE_RELEASE_BUFFERS
mode |= SSL_MODE_RELEASE_BUFFERS;
#endif
obj = TypedData_Wrap_Struct(klass, &ossl_sslctx_type, 0);
ctx = SSL_CTX_new(SSLv23_method());
if (!ctx) {
ossl_raise(eSSLError, "SSL_CTX_new");
}
SSL_CTX_set_mode(ctx, mode);
RTYPEDDATA_DATA(obj) = ctx;
SSL_CTX_set_ex_data(ctx, ossl_ssl_ex_ptr_idx, (void*)obj);
#if !defined(OPENSSL_NO_EC) && defined(HAVE_SSL_CTX_SET_ECDH_AUTO)
/* We use SSL_CTX_set1_curves_list() to specify the curve used in ECDH. It
* allows to specify multiple curve names and OpenSSL will select
* automatically from them. In OpenSSL 1.0.2, the automatic selection has to
* be enabled explicitly. But OpenSSL 1.1.0 removed the knob and it is
* always enabled. To uniform the behavior, we enable the automatic
* selection also in 1.0.2. Users can still disable ECDH by removing ECDH
* cipher suites by SSLContext#ciphers=. */
if (!SSL_CTX_set_ecdh_auto(ctx, 1))
ossl_raise(eSSLError, "SSL_CTX_set_ecdh_auto");
#endif
return obj;
}
/*
* call-seq:
* ctx.ssl_version = :TLSv1
* ctx.ssl_version = "SSLv23_client"
*
* You can get a list of valid versions with OpenSSL::SSL::SSLContext::METHODS
*/
static VALUE
ossl_sslctx_set_ssl_version(VALUE self, VALUE ssl_method)
{
SSL_CTX *ctx;
const char *s;
VALUE m = ssl_method;
int i;
GetSSLCTX(self, ctx);
if (RB_TYPE_P(ssl_method, T_SYMBOL))
m = rb_sym2str(ssl_method);
s = StringValueCStr(m);
for (i = 0; i < numberof(ossl_ssl_method_tab); i++) {
if (strcmp(ossl_ssl_method_tab[i].name, s) == 0) {
#if defined(HAVE_SSL_CTX_SET_MIN_PROTO_VERSION)
int version = ossl_ssl_method_tab[i].version;
#endif
SSL_METHOD *method = ossl_ssl_method_tab[i].func();
if (SSL_CTX_set_ssl_version(ctx, method) != 1)
ossl_raise(eSSLError, "SSL_CTX_set_ssl_version");
#if defined(HAVE_SSL_CTX_SET_MIN_PROTO_VERSION)
if (!SSL_CTX_set_min_proto_version(ctx, version))
ossl_raise(eSSLError, "SSL_CTX_set_min_proto_version");
if (!SSL_CTX_set_max_proto_version(ctx, version))
ossl_raise(eSSLError, "SSL_CTX_set_max_proto_version");
#endif
return ssl_method;
}
}
ossl_raise(rb_eArgError, "unknown SSL method `%"PRIsVALUE"'.", m);
}
static VALUE
ossl_call_client_cert_cb(VALUE obj)
{
VALUE cb, ary, cert, key;
cb = rb_funcall(obj, rb_intern("client_cert_cb"), 0);
if (NIL_P(cb)) return Qfalse;
ary = rb_funcall(cb, rb_intern("call"), 1, obj);
Check_Type(ary, T_ARRAY);
GetX509CertPtr(cert = rb_ary_entry(ary, 0));
GetPKeyPtr(key = rb_ary_entry(ary, 1));
ossl_ssl_set_x509(obj, cert);
ossl_ssl_set_key(obj, key);
return Qtrue;
}
static int
ossl_client_cert_cb(SSL *ssl, X509 **x509, EVP_PKEY **pkey)
{
VALUE obj, success;
obj = (VALUE)SSL_get_ex_data(ssl, ossl_ssl_ex_ptr_idx);
success = rb_protect(ossl_call_client_cert_cb, obj, NULL);
if (!RTEST(success)) return 0;
*x509 = DupX509CertPtr(ossl_ssl_get_x509(obj));
*pkey = DupPKeyPtr(ossl_ssl_get_key(obj));
return 1;
}
#if !defined(OPENSSL_NO_DH)
static VALUE
ossl_call_tmp_dh_callback(VALUE args)
{
VALUE cb, dh;
EVP_PKEY *pkey;
cb = rb_funcall(rb_ary_entry(args, 0), rb_intern("tmp_dh_callback"), 0);
if (NIL_P(cb)) return Qfalse;
dh = rb_apply(cb, rb_intern("call"), args);
pkey = GetPKeyPtr(dh);
if (EVP_PKEY_base_id(pkey) != EVP_PKEY_DH) return Qfalse;
return dh;
}
static DH*
ossl_tmp_dh_callback(SSL *ssl, int is_export, int keylength)
{
VALUE args, dh, rb_ssl;
rb_ssl = (VALUE)SSL_get_ex_data(ssl, ossl_ssl_ex_ptr_idx);
args = rb_ary_new_from_args(3, rb_ssl, INT2FIX(is_export), INT2FIX(keylength));
dh = rb_protect(ossl_call_tmp_dh_callback, args, NULL);
if (!RTEST(dh)) return NULL;
ossl_ssl_set_tmp_dh(rb_ssl, dh);
return EVP_PKEY_get0_DH(GetPKeyPtr(dh));
}
#endif /* OPENSSL_NO_DH */
#if !defined(OPENSSL_NO_EC) && defined(HAVE_SSL_CTX_SET_TMP_ECDH_CALLBACK)
static VALUE
ossl_call_tmp_ecdh_callback(VALUE args)
{
VALUE cb, ecdh;
EVP_PKEY *pkey;
cb = rb_funcall(rb_ary_entry(args, 0), rb_intern("tmp_ecdh_callback"), 0);
if (NIL_P(cb)) return Qfalse;
ecdh = rb_apply(cb, rb_intern("call"), args);
pkey = GetPKeyPtr(ecdh);
if (EVP_PKEY_base_id(pkey) != EVP_PKEY_EC) return Qfalse;
return ecdh;
}
static EC_KEY*
ossl_tmp_ecdh_callback(SSL *ssl, int is_export, int keylength)
{
VALUE args, ecdh, rb_ssl;
rb_ssl = (VALUE)SSL_get_ex_data(ssl, ossl_ssl_ex_ptr_idx);
args = rb_ary_new_from_args(3, rb_ssl, INT2FIX(is_export), INT2FIX(keylength));
ecdh = rb_protect(ossl_call_tmp_ecdh_callback, args, NULL);
if (!RTEST(ecdh)) return NULL;
ossl_ssl_set_tmp_ecdh(rb_ssl, ecdh);
return EVP_PKEY_get0_EC_KEY(GetPKeyPtr(ecdh));
}
#endif
static int
ossl_ssl_verify_callback(int preverify_ok, X509_STORE_CTX *ctx)
{
VALUE cb;
SSL *ssl;
ssl = X509_STORE_CTX_get_ex_data(ctx, SSL_get_ex_data_X509_STORE_CTX_idx());
cb = (VALUE)SSL_get_ex_data(ssl, ossl_ssl_ex_vcb_idx);
X509_STORE_CTX_set_ex_data(ctx, ossl_store_ctx_ex_verify_cb_idx, (void *)cb);
return ossl_verify_cb(preverify_ok, ctx);
}
static VALUE
ossl_call_session_get_cb(VALUE ary)
{
VALUE ssl_obj, cb;
Check_Type(ary, T_ARRAY);
ssl_obj = rb_ary_entry(ary, 0);
cb = rb_funcall(ssl_obj, rb_intern("session_get_cb"), 0);
if (NIL_P(cb)) return Qnil;
return rb_funcall(cb, rb_intern("call"), 1, ary);
}
/* this method is currently only called for servers (in OpenSSL <= 0.9.8e) */
static SSL_SESSION *
#if OPENSSL_VERSION_NUMBER >= 0x10100000L && !defined(LIBRESSL_VERSION_NUMBER)
ossl_sslctx_session_get_cb(SSL *ssl, const unsigned char *buf, int len, int *copy)
#else
ossl_sslctx_session_get_cb(SSL *ssl, unsigned char *buf, int len, int *copy)
#endif
{
VALUE ary, ssl_obj, ret_obj;
SSL_SESSION *sess;
void *ptr;
int state = 0;
OSSL_Debug("SSL SESSION get callback entered");
if ((ptr = SSL_get_ex_data(ssl, ossl_ssl_ex_ptr_idx)) == NULL)
return NULL;
ssl_obj = (VALUE)ptr;
ary = rb_ary_new2(2);
rb_ary_push(ary, ssl_obj);
rb_ary_push(ary, rb_str_new((const char *)buf, len));
ret_obj = rb_protect(ossl_call_session_get_cb, ary, &state);
if (state) {
rb_ivar_set(ssl_obj, ID_callback_state, INT2NUM(state));
return NULL;
}
if (!rb_obj_is_instance_of(ret_obj, cSSLSession))
return NULL;
SafeGetSSLSession(ret_obj, sess);
*copy = 1;
return sess;
}
static VALUE
ossl_call_session_new_cb(VALUE ary)
{
VALUE ssl_obj, cb;
Check_Type(ary, T_ARRAY);
ssl_obj = rb_ary_entry(ary, 0);
cb = rb_funcall(ssl_obj, rb_intern("session_new_cb"), 0);
if (NIL_P(cb)) return Qnil;
return rb_funcall(cb, rb_intern("call"), 1, ary);
}
/* return 1 normal. return 0 removes the session */
static int
ossl_sslctx_session_new_cb(SSL *ssl, SSL_SESSION *sess)
{
VALUE ary, ssl_obj, sess_obj;
void *ptr;
int state = 0;
OSSL_Debug("SSL SESSION new callback entered");
if ((ptr = SSL_get_ex_data(ssl, ossl_ssl_ex_ptr_idx)) == NULL)
return 1;
ssl_obj = (VALUE)ptr;
sess_obj = rb_obj_alloc(cSSLSession);
SSL_SESSION_up_ref(sess);
DATA_PTR(sess_obj) = sess;
ary = rb_ary_new2(2);
rb_ary_push(ary, ssl_obj);
rb_ary_push(ary, sess_obj);
rb_protect(ossl_call_session_new_cb, ary, &state);
if (state) {
rb_ivar_set(ssl_obj, ID_callback_state, INT2NUM(state));
}
/*
* return 0 which means to OpenSSL that the session is still
* valid (since we created Ruby Session object) and was not freed by us
* with SSL_SESSION_free(). Call SSLContext#remove_session(sess) in
* session_get_cb block if you don't want OpenSSL to cache the session
* internally.
*/
return 0;
}
static VALUE
ossl_call_session_remove_cb(VALUE ary)
{
VALUE sslctx_obj, cb;
Check_Type(ary, T_ARRAY);
sslctx_obj = rb_ary_entry(ary, 0);
cb = rb_iv_get(sslctx_obj, "@session_remove_cb");
if (NIL_P(cb)) return Qnil;
return rb_funcall(cb, rb_intern("call"), 1, ary);
}
static void
ossl_sslctx_session_remove_cb(SSL_CTX *ctx, SSL_SESSION *sess)
{
VALUE ary, sslctx_obj, sess_obj;
void *ptr;
int state = 0;
OSSL_Debug("SSL SESSION remove callback entered");
if ((ptr = SSL_CTX_get_ex_data(ctx, ossl_ssl_ex_ptr_idx)) == NULL)
return;
sslctx_obj = (VALUE)ptr;
sess_obj = rb_obj_alloc(cSSLSession);
SSL_SESSION_up_ref(sess);
DATA_PTR(sess_obj) = sess;
ary = rb_ary_new2(2);
rb_ary_push(ary, sslctx_obj);
rb_ary_push(ary, sess_obj);
rb_protect((VALUE(*)_((VALUE)))ossl_call_session_remove_cb, ary, &state);
if (state) {
/*
the SSL_CTX is frozen, nowhere to save state.
there is no common accessor method to check it either.
rb_ivar_set(sslctx_obj, ID_callback_state, INT2NUM(state));
*/
}
}
static VALUE
ossl_sslctx_add_extra_chain_cert_i(RB_BLOCK_CALL_FUNC_ARGLIST(i, arg))
{
X509 *x509;
SSL_CTX *ctx;
GetSSLCTX(arg, ctx);
x509 = DupX509CertPtr(i);
if(!SSL_CTX_add_extra_chain_cert(ctx, x509)){
ossl_raise(eSSLError, NULL);
}
return i;
}
static VALUE ossl_sslctx_setup(VALUE self);
#ifdef HAVE_SSL_SET_TLSEXT_HOST_NAME
static VALUE
ossl_call_servername_cb(VALUE ary)
{
VALUE ssl_obj, sslctx_obj, cb, ret_obj;
Check_Type(ary, T_ARRAY);
ssl_obj = rb_ary_entry(ary, 0);
sslctx_obj = rb_iv_get(ssl_obj, "@context");
if (NIL_P(sslctx_obj)) return Qnil;
cb = rb_iv_get(sslctx_obj, "@servername_cb");
if (NIL_P(cb)) return Qnil;
ret_obj = rb_funcall(cb, rb_intern("call"), 1, ary);
if (rb_obj_is_kind_of(ret_obj, cSSLContext)) {
SSL *ssl;
SSL_CTX *ctx2;
ossl_sslctx_setup(ret_obj);
GetSSL(ssl_obj, ssl);
GetSSLCTX(ret_obj, ctx2);
SSL_set_SSL_CTX(ssl, ctx2);
rb_iv_set(ssl_obj, "@context", ret_obj);
} else if (!NIL_P(ret_obj)) {
ossl_raise(rb_eArgError, "servername_cb must return an OpenSSL::SSL::SSLContext object or nil");
}
return ret_obj;
}
static int
ssl_servername_cb(SSL *ssl, int *ad, void *arg)
{
VALUE ary, ssl_obj;
void *ptr;
int state = 0;
const char *servername = SSL_get_servername(ssl, TLSEXT_NAMETYPE_host_name);
if (!servername)
return SSL_TLSEXT_ERR_OK;
if ((ptr = SSL_get_ex_data(ssl, ossl_ssl_ex_ptr_idx)) == NULL)
return SSL_TLSEXT_ERR_ALERT_FATAL;
ssl_obj = (VALUE)ptr;
ary = rb_ary_new2(2);
rb_ary_push(ary, ssl_obj);
rb_ary_push(ary, rb_str_new2(servername));
rb_protect((VALUE(*)_((VALUE)))ossl_call_servername_cb, ary, &state);
if (state) {
rb_ivar_set(ssl_obj, ID_callback_state, INT2NUM(state));
return SSL_TLSEXT_ERR_ALERT_FATAL;
}
return SSL_TLSEXT_ERR_OK;
}
#endif
static void
ssl_renegotiation_cb(const SSL *ssl)
{
VALUE ssl_obj, sslctx_obj, cb;
void *ptr;
if ((ptr = SSL_get_ex_data(ssl, ossl_ssl_ex_ptr_idx)) == NULL)
ossl_raise(eSSLError, "SSL object could not be retrieved");
ssl_obj = (VALUE)ptr;
sslctx_obj = rb_iv_get(ssl_obj, "@context");
if (NIL_P(sslctx_obj)) return;
cb = rb_iv_get(sslctx_obj, "@renegotiation_cb");
if (NIL_P(cb)) return;
(void) rb_funcall(cb, rb_intern("call"), 1, ssl_obj);
}
#if defined(HAVE_SSL_CTX_SET_NEXT_PROTO_SELECT_CB) || defined(HAVE_SSL_CTX_SET_ALPN_SELECT_CB)
static VALUE
ssl_npn_encode_protocol_i(VALUE cur, VALUE encoded)
{
int len = RSTRING_LENINT(cur);
char len_byte;
if (len < 1 || len > 255)
ossl_raise(eSSLError, "Advertised protocol must have length 1..255");
/* Encode the length byte */
len_byte = len;
rb_str_buf_cat(encoded, &len_byte, 1);
rb_str_buf_cat(encoded, RSTRING_PTR(cur), len);
return Qnil;
}
static VALUE
ssl_encode_npn_protocols(VALUE protocols)
{
VALUE encoded = rb_str_new(NULL, 0);
rb_iterate(rb_each, protocols, ssl_npn_encode_protocol_i, encoded);
return encoded;
}
static int
ssl_npn_select_cb_common(VALUE cb, const unsigned char **out, unsigned char *outlen, const unsigned char *in, unsigned int inlen)
{
VALUE selected;
long len;
VALUE protocols = rb_ary_new();
unsigned char l;
const unsigned char *in_end = in + inlen;
/* assume OpenSSL verifies this format */
/* The format is len_1|proto_1|...|len_n|proto_n */
while (in < in_end) {
l = *in++;
rb_ary_push(protocols, rb_str_new((const char *)in, l));
in += l;
}
selected = rb_funcall(cb, rb_intern("call"), 1, protocols);
StringValue(selected);
len = RSTRING_LEN(selected);
if (len < 1 || len >= 256) {
ossl_raise(eSSLError, "Selected protocol name must have length 1..255");
}
*out = (unsigned char *)RSTRING_PTR(selected);
*outlen = (unsigned char)len;
return SSL_TLSEXT_ERR_OK;
}
#ifdef HAVE_SSL_CTX_SET_NEXT_PROTO_SELECT_CB
static int
ssl_npn_advertise_cb(SSL *ssl, const unsigned char **out, unsigned int *outlen, void *arg)
{
VALUE sslctx_obj = (VALUE) arg;
VALUE protocols = rb_iv_get(sslctx_obj, "@_protocols");
*out = (const unsigned char *) RSTRING_PTR(protocols);
*outlen = RSTRING_LENINT(protocols);
return SSL_TLSEXT_ERR_OK;
}
static int
ssl_npn_select_cb(SSL *s, unsigned char **out, unsigned char *outlen, const unsigned char *in, unsigned int inlen, void *arg)
{
VALUE sslctx_obj, cb;
sslctx_obj = (VALUE) arg;
cb = rb_iv_get(sslctx_obj, "@npn_select_cb");
return ssl_npn_select_cb_common(cb, (const unsigned char **)out, outlen, in, inlen);
}
#endif
#ifdef HAVE_SSL_CTX_SET_ALPN_SELECT_CB
static int
ssl_alpn_select_cb(SSL *ssl, const unsigned char **out, unsigned char *outlen, const unsigned char *in, unsigned int inlen, void *arg)
{
VALUE sslctx_obj, cb;
sslctx_obj = (VALUE) arg;
cb = rb_iv_get(sslctx_obj, "@alpn_select_cb");
return ssl_npn_select_cb_common(cb, out, outlen, in, inlen);
}
#endif
#endif /* HAVE_SSL_CTX_SET_NEXT_PROTO_SELECT_CB || HAVE_SSL_CTX_SET_ALPN_SELECT_CB */
/* This function may serve as the entry point to support further callbacks. */
static void
ssl_info_cb(const SSL *ssl, int where, int val)
{
int is_server = SSL_is_server((SSL *)ssl);
if (is_server && where & SSL_CB_HANDSHAKE_START) {
ssl_renegotiation_cb(ssl);
}
}
/*
* Gets various OpenSSL options.
*/
static VALUE
ossl_sslctx_get_options(VALUE self)
{
SSL_CTX *ctx;
GetSSLCTX(self, ctx);
return LONG2NUM(SSL_CTX_get_options(ctx));
}
/*
* Sets various OpenSSL options.
*/
static VALUE
ossl_sslctx_set_options(VALUE self, VALUE options)
{
SSL_CTX *ctx;
rb_check_frozen(self);
GetSSLCTX(self, ctx);
SSL_CTX_clear_options(ctx, SSL_CTX_get_options(ctx));
if (NIL_P(options)) {
SSL_CTX_set_options(ctx, SSL_OP_ALL);
} else {
SSL_CTX_set_options(ctx, NUM2LONG(options));
}
return self;
}
/*
* call-seq:
* ctx.setup => Qtrue # first time
* ctx.setup => nil # thereafter
*
* This method is called automatically when a new SSLSocket is created.
* However, it is not thread-safe and must be called before creating
* SSLSocket objects in a multi-threaded program.
*/
static VALUE
ossl_sslctx_setup(VALUE self)
{
SSL_CTX *ctx;
X509 *cert = NULL, *client_ca = NULL;
EVP_PKEY *key = NULL;
char *ca_path = NULL, *ca_file = NULL;
int verify_mode;
long i;
VALUE val;
if(OBJ_FROZEN(self)) return Qnil;
GetSSLCTX(self, ctx);
#if !defined(OPENSSL_NO_DH)
SSL_CTX_set_tmp_dh_callback(ctx, ossl_tmp_dh_callback);
#endif
#if !defined(OPENSSL_NO_EC)
/* We added SSLContext#tmp_ecdh_callback= in Ruby 2.3.0,
* but SSL_CTX_set_tmp_ecdh_callback() was removed in OpenSSL 1.1.0. */
if (RTEST(ossl_sslctx_get_tmp_ecdh_cb(self))) {
# if defined(HAVE_SSL_CTX_SET_TMP_ECDH_CALLBACK)
rb_warn("#tmp_ecdh_callback= is deprecated; use #ecdh_curves= instead");
SSL_CTX_set_tmp_ecdh_callback(ctx, ossl_tmp_ecdh_callback);
# if defined(HAVE_SSL_CTX_SET_ECDH_AUTO)
/* tmp_ecdh_callback and ecdh_auto conflict; OpenSSL ignores
* tmp_ecdh_callback. So disable ecdh_auto. */
if (!SSL_CTX_set_ecdh_auto(ctx, 0))
ossl_raise(eSSLError, "SSL_CTX_set_ecdh_auto");
# endif
# else
ossl_raise(eSSLError, "OpenSSL does not support tmp_ecdh_callback; "
"use #ecdh_curves= instead");
# endif
}
#endif /* OPENSSL_NO_EC */
val = ossl_sslctx_get_cert_store(self);
if (!NIL_P(val)) {
X509_STORE *store = GetX509StorePtr(val); /* NO NEED TO DUP */
SSL_CTX_set_cert_store(ctx, store);
#if !defined(HAVE_X509_STORE_UP_REF)
/*
* WORKAROUND:
* X509_STORE can count references, but
* X509_STORE_free() doesn't care it.
* So we won't increment it but mark it by ex_data.
*/
SSL_CTX_set_ex_data(ctx, ossl_ssl_ex_store_p, (void *)1);
#else /* Fixed in OpenSSL 1.0.2; bff9ce4db38b (master), 5b4b9ce976fc (1.0.2) */
X509_STORE_up_ref(store);
#endif
}
val = ossl_sslctx_get_extra_cert(self);
if(!NIL_P(val)){
rb_block_call(val, rb_intern("each"), 0, 0, ossl_sslctx_add_extra_chain_cert_i, self);
}
/* private key may be bundled in certificate file. */
val = ossl_sslctx_get_cert(self);
cert = NIL_P(val) ? NULL : GetX509CertPtr(val); /* NO DUP NEEDED */
val = ossl_sslctx_get_key(self);
key = NIL_P(val) ? NULL : GetPKeyPtr(val); /* NO DUP NEEDED */
if (cert && key) {
if (!SSL_CTX_use_certificate(ctx, cert)) {
/* Adds a ref => Safe to FREE */
ossl_raise(eSSLError, "SSL_CTX_use_certificate");
}
if (!SSL_CTX_use_PrivateKey(ctx, key)) {
/* Adds a ref => Safe to FREE */
ossl_raise(eSSLError, "SSL_CTX_use_PrivateKey");
}
if (!SSL_CTX_check_private_key(ctx)) {
ossl_raise(eSSLError, "SSL_CTX_check_private_key");
}
}
val = ossl_sslctx_get_client_ca(self);
if(!NIL_P(val)){
if (RB_TYPE_P(val, T_ARRAY)) {
for(i = 0; i < RARRAY_LEN(val); i++){
client_ca = GetX509CertPtr(RARRAY_AREF(val, i));
if (!SSL_CTX_add_client_CA(ctx, client_ca)){
/* Copies X509_NAME => FREE it. */
ossl_raise(eSSLError, "SSL_CTX_add_client_CA");
}
}
}
else{
client_ca = GetX509CertPtr(val); /* NO DUP NEEDED. */
if (!SSL_CTX_add_client_CA(ctx, client_ca)){
/* Copies X509_NAME => FREE it. */
ossl_raise(eSSLError, "SSL_CTX_add_client_CA");
}
}
}
val = ossl_sslctx_get_ca_file(self);
ca_file = NIL_P(val) ? NULL : StringValueCStr(val);
val = ossl_sslctx_get_ca_path(self);
ca_path = NIL_P(val) ? NULL : StringValueCStr(val);
if(ca_file || ca_path){
if (!SSL_CTX_load_verify_locations(ctx, ca_file, ca_path))
rb_warning("can't set verify locations");
}
val = ossl_sslctx_get_verify_mode(self);
verify_mode = NIL_P(val) ? SSL_VERIFY_NONE : NUM2INT(val);
SSL_CTX_set_verify(ctx, verify_mode, ossl_ssl_verify_callback);
if (RTEST(ossl_sslctx_get_client_cert_cb(self)))
SSL_CTX_set_client_cert_cb(ctx, ossl_client_cert_cb);
val = ossl_sslctx_get_timeout(self);
if(!NIL_P(val)) SSL_CTX_set_timeout(ctx, NUM2LONG(val));
val = ossl_sslctx_get_verify_dep(self);
if(!NIL_P(val)) SSL_CTX_set_verify_depth(ctx, NUM2INT(val));
#ifdef HAVE_SSL_CTX_SET_NEXT_PROTO_SELECT_CB
val = rb_iv_get(self, "@npn_protocols");
if (!NIL_P(val)) {
rb_iv_set(self, "@_protocols", ssl_encode_npn_protocols(val));
SSL_CTX_set_next_protos_advertised_cb(ctx, ssl_npn_advertise_cb, (void *) self);
OSSL_Debug("SSL NPN advertise callback added");
}
if (RTEST(rb_iv_get(self, "@npn_select_cb"))) {
SSL_CTX_set_next_proto_select_cb(ctx, ssl_npn_select_cb, (void *) self);
OSSL_Debug("SSL NPN select callback added");
}
#endif
#ifdef HAVE_SSL_CTX_SET_ALPN_SELECT_CB
val = rb_iv_get(self, "@alpn_protocols");
if (!NIL_P(val)) {
VALUE rprotos = ssl_encode_npn_protocols(val);
SSL_CTX_set_alpn_protos(ctx, (unsigned char *)RSTRING_PTR(rprotos), RSTRING_LENINT(rprotos));
OSSL_Debug("SSL ALPN values added");
}
if (RTEST(rb_iv_get(self, "@alpn_select_cb"))) {
SSL_CTX_set_alpn_select_cb(ctx, ssl_alpn_select_cb, (void *) self);
OSSL_Debug("SSL ALPN select callback added");
}
#endif
rb_obj_freeze(self);
val = ossl_sslctx_get_sess_id_ctx(self);
if (!NIL_P(val)){
StringValue(val);
if (!SSL_CTX_set_session_id_context(ctx, (unsigned char *)RSTRING_PTR(val),
RSTRING_LENINT(val))){
ossl_raise(eSSLError, "SSL_CTX_set_session_id_context");
}
}
if (RTEST(rb_iv_get(self, "@session_get_cb"))) {
SSL_CTX_sess_set_get_cb(ctx, ossl_sslctx_session_get_cb);
OSSL_Debug("SSL SESSION get callback added");
}
if (RTEST(rb_iv_get(self, "@session_new_cb"))) {
SSL_CTX_sess_set_new_cb(ctx, ossl_sslctx_session_new_cb);
OSSL_Debug("SSL SESSION new callback added");
}
if (RTEST(rb_iv_get(self, "@session_remove_cb"))) {
SSL_CTX_sess_set_remove_cb(ctx, ossl_sslctx_session_remove_cb);
OSSL_Debug("SSL SESSION remove callback added");
}
#ifdef HAVE_SSL_SET_TLSEXT_HOST_NAME
val = rb_iv_get(self, "@servername_cb");
if (!NIL_P(val)) {
SSL_CTX_set_tlsext_servername_callback(ctx, ssl_servername_cb);
OSSL_Debug("SSL TLSEXT servername callback added");
}
#endif
return Qtrue;
}
static VALUE
ossl_ssl_cipher_to_ary(const SSL_CIPHER *cipher)
{
VALUE ary;
int bits, alg_bits;
ary = rb_ary_new2(4);
rb_ary_push(ary, rb_str_new2(SSL_CIPHER_get_name(cipher)));
rb_ary_push(ary, rb_str_new2(SSL_CIPHER_get_version(cipher)));
bits = SSL_CIPHER_get_bits(cipher, &alg_bits);
rb_ary_push(ary, INT2FIX(bits));
rb_ary_push(ary, INT2FIX(alg_bits));
return ary;
}
/*
* call-seq:
* ctx.ciphers => [[name, version, bits, alg_bits], ...]
*
* The list of ciphers configured for this context.
*/
static VALUE
ossl_sslctx_get_ciphers(VALUE self)
{
SSL_CTX *ctx;
STACK_OF(SSL_CIPHER) *ciphers;
const SSL_CIPHER *cipher;
VALUE ary;
int i, num;
GetSSLCTX(self, ctx);
if(!ctx){
rb_warning("SSL_CTX is not initialized.");
return Qnil;
}
ciphers = SSL_CTX_get_ciphers(ctx);
if (!ciphers)
return rb_ary_new();
num = sk_SSL_CIPHER_num(ciphers);
ary = rb_ary_new2(num);
for(i = 0; i < num; i++){
cipher = sk_SSL_CIPHER_value(ciphers, i);
rb_ary_push(ary, ossl_ssl_cipher_to_ary(cipher));
}
return ary;
}
/*
* call-seq:
* ctx.ciphers = "cipher1:cipher2:..."
* ctx.ciphers = [name, ...]
* ctx.ciphers = [[name, version, bits, alg_bits], ...]
*
* Sets the list of available ciphers for this context. Note in a server
* context some ciphers require the appropriate certificates. For example, an
* RSA cipher can only be chosen when an RSA certificate is available.
*
* See also OpenSSL::Cipher and OpenSSL::Cipher::ciphers
*/
static VALUE
ossl_sslctx_set_ciphers(VALUE self, VALUE v)
{
SSL_CTX *ctx;
VALUE str, elem;
int i;
rb_check_frozen(self);
if (NIL_P(v))
return v;
else if (RB_TYPE_P(v, T_ARRAY)) {
str = rb_str_new(0, 0);
for (i = 0; i < RARRAY_LEN(v); i++) {
elem = rb_ary_entry(v, i);
if (RB_TYPE_P(elem, T_ARRAY)) elem = rb_ary_entry(elem, 0);
elem = rb_String(elem);
rb_str_append(str, elem);
if (i < RARRAY_LEN(v)-1) rb_str_cat2(str, ":");
}
} else {
str = v;
StringValue(str);
}
GetSSLCTX(self, ctx);
if(!ctx){
ossl_raise(eSSLError, "SSL_CTX is not initialized.");
return Qnil;
}
if (!SSL_CTX_set_cipher_list(ctx, StringValueCStr(str))) {
ossl_raise(eSSLError, "SSL_CTX_set_cipher_list");
}
return v;
}
#if !defined(OPENSSL_NO_EC)
/*
* call-seq:
* ctx.ecdh_curves = curve_list -> curve_list
*
* Sets the list of "supported elliptic curves" for this context.
*
* For a TLS client, the list is directly used in the Supported Elliptic Curves
* Extension. For a server, the list is used by OpenSSL to determine the set of
* shared curves. OpenSSL will pick the most appropriate one from it.
*
* Note that this works differently with old OpenSSL (<= 1.0.1). Only one curve
* can be set, and this has no effect for TLS clients.
*
* === Example
* ctx1 = OpenSSL::SSL::SSLContext.new
* ctx1.ecdh_curves = "X25519:P-256:P-224"
* svr = OpenSSL::SSL::SSLServer.new(tcp_svr, ctx1)
* Thread.new { svr.accept }
*
* ctx2 = OpenSSL::SSL::SSLContext.new
* ctx2.ecdh_curves = "P-256"
* cli = OpenSSL::SSL::SSLSocket.new(tcp_sock, ctx2)
* cli.connect
*
* p cli.tmp_key.group.curve_name
* # => "prime256v1" (is an alias for NIST P-256)
*/
static VALUE
ossl_sslctx_set_ecdh_curves(VALUE self, VALUE arg)
{
SSL_CTX *ctx;
rb_check_frozen(self);
GetSSLCTX(self, ctx);
StringValueCStr(arg);
#if defined(HAVE_SSL_CTX_SET1_CURVES_LIST)
if (!SSL_CTX_set1_curves_list(ctx, RSTRING_PTR(arg)))
ossl_raise(eSSLError, NULL);
#else
/* OpenSSL does not have SSL_CTX_set1_curves_list()... Fallback to
* SSL_CTX_set_tmp_ecdh(). So only the first curve is used. */
{
VALUE curve, splitted;
EC_KEY *ec;
int nid;
splitted = rb_str_split(arg, ":");
if (!RARRAY_LEN(splitted))
ossl_raise(eSSLError, "invalid input format");
curve = RARRAY_AREF(splitted, 0);
StringValueCStr(curve);
/* SSL_CTX_set1_curves_list() accepts NIST names */
nid = EC_curve_nist2nid(RSTRING_PTR(curve));
if (nid == NID_undef)
nid = OBJ_txt2nid(RSTRING_PTR(curve));
if (nid == NID_undef)
ossl_raise(eSSLError, "unknown curve name");
ec = EC_KEY_new_by_curve_name(nid);
if (!ec)
ossl_raise(eSSLError, NULL);
EC_KEY_set_asn1_flag(ec, OPENSSL_EC_NAMED_CURVE);
SSL_CTX_set_tmp_ecdh(ctx, ec);
# if defined(HAVE_SSL_CTX_SET_ECDH_AUTO)
/* tmp_ecdh and ecdh_auto conflict. tmp_ecdh is ignored when ecdh_auto
* is enabled. So disable ecdh_auto. */
if (!SSL_CTX_set_ecdh_auto(ctx, 0))
ossl_raise(eSSLError, "SSL_CTX_set_ecdh_auto");
# endif
}
#endif
return arg;
}
#else
#define ossl_sslctx_set_ecdh_curves rb_f_notimplement
#endif
/*
* call-seq:
* ctx.security_level -> Integer
*
* Returns the security level for the context.
*
* See also OpenSSL::SSL::SSLContext#security_level=.
*/
static VALUE
ossl_sslctx_get_security_level(VALUE self)
{
SSL_CTX *ctx;
GetSSLCTX(self, ctx);
#if defined(HAVE_SSL_CTX_GET_SECURITY_LEVEL)
return INT2FIX(SSL_CTX_get_security_level(ctx));
#else
(void)ctx;
return INT2FIX(0);
#endif
}
/*
* call-seq:
* ctx.security_level=(integer) -> Integer
*
* Sets the security level for the context. OpenSSL limits parameters according
* to the level. The "parameters" include: ciphersuites, curves, key sizes,
* certificate signature algorithms, protocol version and so on. For example,
* level 1 rejects parameters offering below 80 bits of security, such as
* ciphersuites using MD5 for the MAC or RSA keys shorter than 1024 bits.
*
* Note that attempts to set such parameters with insufficient security are
* also blocked. You need to lower the level first.
*
* This feature is not supported in OpenSSL < 1.1.0, and setting the level to
* other than 0 will raise NotImplementedError. Level 0 means everything is
* permitted, the same behavior as previous versions of OpenSSL.
*
* See the manpage of SSL_CTX_set_security_level(3) for details.
*/
static VALUE
ossl_sslctx_set_security_level(VALUE self, VALUE value)
{
SSL_CTX *ctx;
rb_check_frozen(self);
GetSSLCTX(self, ctx);
#if defined(HAVE_SSL_CTX_GET_SECURITY_LEVEL)
SSL_CTX_set_security_level(ctx, NUM2INT(value));
#else
(void)ctx;
if (NUM2INT(value) != 0)
ossl_raise(rb_eNotImpError, "setting security level to other than 0 is "
"not supported in this version of OpenSSL");
#endif
return value;
}
/*
* call-seq:
* ctx.session_add(session) -> true | false
*
* Adds +session+ to the session cache
*/
static VALUE
ossl_sslctx_session_add(VALUE self, VALUE arg)
{
SSL_CTX *ctx;
SSL_SESSION *sess;
GetSSLCTX(self, ctx);
SafeGetSSLSession(arg, sess);
return SSL_CTX_add_session(ctx, sess) == 1 ? Qtrue : Qfalse;
}
/*
* call-seq:
* ctx.session_remove(session) -> true | false
*
* Removes +session+ from the session cache
*/
static VALUE
ossl_sslctx_session_remove(VALUE self, VALUE arg)
{
SSL_CTX *ctx;
SSL_SESSION *sess;
GetSSLCTX(self, ctx);
SafeGetSSLSession(arg, sess);
return SSL_CTX_remove_session(ctx, sess) == 1 ? Qtrue : Qfalse;
}
/*
* call-seq:
* ctx.session_cache_mode -> Integer
*
* The current session cache mode.
*/
static VALUE
ossl_sslctx_get_session_cache_mode(VALUE self)
{
SSL_CTX *ctx;
GetSSLCTX(self, ctx);
return LONG2NUM(SSL_CTX_get_session_cache_mode(ctx));
}
/*
* call-seq:
* ctx.session_cache_mode=(integer) -> Integer
*
* Sets the SSL session cache mode. Bitwise-or together the desired
* SESSION_CACHE_* constants to set. See SSL_CTX_set_session_cache_mode(3) for
* details.
*/
static VALUE
ossl_sslctx_set_session_cache_mode(VALUE self, VALUE arg)
{
SSL_CTX *ctx;
GetSSLCTX(self, ctx);
SSL_CTX_set_session_cache_mode(ctx, NUM2LONG(arg));
return arg;
}
/*
* call-seq:
* ctx.session_cache_size -> Integer
*
* Returns the current session cache size. Zero is used to represent an
* unlimited cache size.
*/
static VALUE
ossl_sslctx_get_session_cache_size(VALUE self)
{
SSL_CTX *ctx;
GetSSLCTX(self, ctx);
return LONG2NUM(SSL_CTX_sess_get_cache_size(ctx));
}
/*
* call-seq:
* ctx.session_cache_size=(integer) -> Integer
*
* Sets the session cache size. Returns the previously valid session cache
* size. Zero is used to represent an unlimited session cache size.
*/
static VALUE
ossl_sslctx_set_session_cache_size(VALUE self, VALUE arg)
{
SSL_CTX *ctx;
GetSSLCTX(self, ctx);
SSL_CTX_sess_set_cache_size(ctx, NUM2LONG(arg));
return arg;
}
/*
* call-seq:
* ctx.session_cache_stats -> Hash
*
* Returns a Hash containing the following keys:
*
* :accept:: Number of started SSL/TLS handshakes in server mode
* :accept_good:: Number of established SSL/TLS sessions in server mode
* :accept_renegotiate:: Number of start renegotiations in server mode
* :cache_full:: Number of sessions that were removed due to cache overflow
* :cache_hits:: Number of successfully reused connections
* :cache_misses:: Number of sessions proposed by clients that were not found
* in the cache
* :cache_num:: Number of sessions in the internal session cache
* :cb_hits:: Number of sessions retrieved from the external cache in server
* mode
* :connect:: Number of started SSL/TLS handshakes in client mode
* :connect_good:: Number of established SSL/TLS sessions in client mode
* :connect_renegotiate:: Number of start renegotiations in client mode
* :timeouts:: Number of sessions proposed by clients that were found in the
* cache but had expired due to timeouts
*/
static VALUE
ossl_sslctx_get_session_cache_stats(VALUE self)
{
SSL_CTX *ctx;
VALUE hash;
GetSSLCTX(self, ctx);
hash = rb_hash_new();
rb_hash_aset(hash, ID2SYM(rb_intern("cache_num")), LONG2NUM(SSL_CTX_sess_number(ctx)));
rb_hash_aset(hash, ID2SYM(rb_intern("connect")), LONG2NUM(SSL_CTX_sess_connect(ctx)));
rb_hash_aset(hash, ID2SYM(rb_intern("connect_good")), LONG2NUM(SSL_CTX_sess_connect_good(ctx)));
rb_hash_aset(hash, ID2SYM(rb_intern("connect_renegotiate")), LONG2NUM(SSL_CTX_sess_connect_renegotiate(ctx)));
rb_hash_aset(hash, ID2SYM(rb_intern("accept")), LONG2NUM(SSL_CTX_sess_accept(ctx)));
rb_hash_aset(hash, ID2SYM(rb_intern("accept_good")), LONG2NUM(SSL_CTX_sess_accept_good(ctx)));
rb_hash_aset(hash, ID2SYM(rb_intern("accept_renegotiate")), LONG2NUM(SSL_CTX_sess_accept_renegotiate(ctx)));
rb_hash_aset(hash, ID2SYM(rb_intern("cache_hits")), LONG2NUM(SSL_CTX_sess_hits(ctx)));
rb_hash_aset(hash, ID2SYM(rb_intern("cb_hits")), LONG2NUM(SSL_CTX_sess_cb_hits(ctx)));
rb_hash_aset(hash, ID2SYM(rb_intern("cache_misses")), LONG2NUM(SSL_CTX_sess_misses(ctx)));
rb_hash_aset(hash, ID2SYM(rb_intern("cache_full")), LONG2NUM(SSL_CTX_sess_cache_full(ctx)));
rb_hash_aset(hash, ID2SYM(rb_intern("timeouts")), LONG2NUM(SSL_CTX_sess_timeouts(ctx)));
return hash;
}
/*
* call-seq:
* ctx.flush_sessions(time | nil) -> self
*
* Removes sessions in the internal cache that have expired at +time+.
*/
static VALUE
ossl_sslctx_flush_sessions(int argc, VALUE *argv, VALUE self)
{
VALUE arg1;
SSL_CTX *ctx;
time_t tm = 0;
rb_scan_args(argc, argv, "01", &arg1);
GetSSLCTX(self, ctx);
if (NIL_P(arg1)) {
tm = time(0);
} else if (rb_obj_is_instance_of(arg1, rb_cTime)) {
tm = NUM2LONG(rb_funcall(arg1, rb_intern("to_i"), 0));
} else {
ossl_raise(rb_eArgError, "arg must be Time or nil");
}
SSL_CTX_flush_sessions(ctx, (long)tm);
return self;
}
/*
* SSLSocket class
*/
#ifndef OPENSSL_NO_SOCK
static inline int
ssl_started(SSL *ssl)
{
/* the FD is set in ossl_ssl_setup(), called by #connect or #accept */
return SSL_get_fd(ssl) >= 0;
}
static void
ossl_ssl_shutdown(SSL *ssl)
{
int i;
/* 4 is from SSL_smart_shutdown() of mod_ssl.c (v2.2.19) */
/* It says max 2x pending + 2x data = 4 */
for (i = 0; i < 4; ++i) {
/*
* Ignore the case SSL_shutdown returns -1. Empty handshake_func
* must not happen.
*/
if (SSL_shutdown(ssl) != 0)
break;
}
ossl_clear_error();
}
static void
ossl_ssl_free(void *ssl)
{
SSL_free(ssl);
}
const rb_data_type_t ossl_ssl_type = {
"OpenSSL/SSL",
{
0, ossl_ssl_free,
},
0, 0, RUBY_TYPED_FREE_IMMEDIATELY,
};
static VALUE
ossl_ssl_s_alloc(VALUE klass)
{
return TypedData_Wrap_Struct(klass, &ossl_ssl_type, NULL);
}
/*
* call-seq:
* SSLSocket.new(io) => aSSLSocket
* SSLSocket.new(io, ctx) => aSSLSocket
*
* Creates a new SSL socket from +io+ which must be a real ruby object (not an
* IO-like object that responds to read/write).
*
* If +ctx+ is provided the SSL Sockets initial params will be taken from
* the context.
*
* The OpenSSL::Buffering module provides additional IO methods.
*
* This method will freeze the SSLContext if one is provided;
* however, session management is still allowed in the frozen SSLContext.
*/
static VALUE
ossl_ssl_initialize(int argc, VALUE *argv, VALUE self)
{
VALUE io, v_ctx, verify_cb;
SSL *ssl;
SSL_CTX *ctx;
TypedData_Get_Struct(self, SSL, &ossl_ssl_type, ssl);
if (ssl)
ossl_raise(eSSLError, "SSL already initialized");
if (rb_scan_args(argc, argv, "11", &io, &v_ctx) == 1)
v_ctx = rb_funcall(cSSLContext, rb_intern("new"), 0);
GetSSLCTX(v_ctx, ctx);
ossl_ssl_set_ctx(self, v_ctx);
ossl_sslctx_setup(v_ctx);
if (rb_respond_to(io, rb_intern("nonblock=")))
rb_funcall(io, rb_intern("nonblock="), 1, Qtrue);
ossl_ssl_set_io(self, io);
ossl_ssl_set_sync_close(self, Qfalse);
ssl = SSL_new(ctx);
if (!ssl)
ossl_raise(eSSLError, NULL);
RTYPEDDATA_DATA(self) = ssl;
SSL_set_ex_data(ssl, ossl_ssl_ex_ptr_idx, (void *)self);
SSL_set_info_callback(ssl, ssl_info_cb);
verify_cb = ossl_sslctx_get_verify_cb(v_ctx);
SSL_set_ex_data(ssl, ossl_ssl_ex_vcb_idx, (void *)verify_cb);
rb_call_super(0, NULL);
return self;
}
static VALUE
ossl_ssl_setup(VALUE self)
{
VALUE io;
SSL *ssl;
rb_io_t *fptr;
GetSSL(self, ssl);
if (ssl_started(ssl))
return Qtrue;
io = ossl_ssl_get_io(self);
GetOpenFile(io, fptr);
rb_io_check_readable(fptr);
rb_io_check_writable(fptr);
SSL_set_fd(ssl, TO_SOCKET(FPTR_TO_FD(fptr)));
return Qtrue;
}
#ifdef _WIN32
#define ssl_get_error(ssl, ret) (errno = rb_w32_map_errno(WSAGetLastError()), SSL_get_error((ssl), (ret)))
#else
#define ssl_get_error(ssl, ret) SSL_get_error((ssl), (ret))
#endif
static void
write_would_block(int nonblock)
{
if (nonblock) {
VALUE exc = ossl_exc_new(eSSLErrorWaitWritable, "write would block");
rb_exc_raise(exc);
}
}
static void
read_would_block(int nonblock)
{
if (nonblock) {
VALUE exc = ossl_exc_new(eSSLErrorWaitReadable, "read would block");
rb_exc_raise(exc);
}
}
static int
no_exception_p(VALUE opts)
{
if (RB_TYPE_P(opts, T_HASH) &&
rb_hash_lookup2(opts, sym_exception, Qundef) == Qfalse)
return 1;
return 0;
}
static VALUE
ossl_start_ssl(VALUE self, int (*func)(), const char *funcname, VALUE opts)
{
SSL *ssl;
rb_io_t *fptr;
int ret, ret2;
VALUE cb_state;
int nonblock = opts != Qfalse;
rb_ivar_set(self, ID_callback_state, Qnil);
GetSSL(self, ssl);
GetOpenFile(ossl_ssl_get_io(self), fptr);
for(;;){
ret = func(ssl);
cb_state = rb_ivar_get(self, ID_callback_state);
if (!NIL_P(cb_state)) {
/* must cleanup OpenSSL error stack before re-raising */
ossl_clear_error();
rb_jump_tag(NUM2INT(cb_state));
}
if (ret > 0)
break;
switch((ret2 = ssl_get_error(ssl, ret))){
case SSL_ERROR_WANT_WRITE:
if (no_exception_p(opts)) { return sym_wait_writable; }
write_would_block(nonblock);
rb_io_wait_writable(FPTR_TO_FD(fptr));
continue;
case SSL_ERROR_WANT_READ:
if (no_exception_p(opts)) { return sym_wait_readable; }
read_would_block(nonblock);
rb_io_wait_readable(FPTR_TO_FD(fptr));
continue;
case SSL_ERROR_SYSCALL:
if (errno) rb_sys_fail(funcname);
ossl_raise(eSSLError, "%s SYSCALL returned=%d errno=%d state=%s", funcname, ret2, errno, SSL_state_string_long(ssl));
default:
ossl_raise(eSSLError, "%s returned=%d errno=%d state=%s", funcname, ret2, errno, SSL_state_string_long(ssl));
}
}
return self;
}
/*
* call-seq:
* ssl.connect => self
*
* Initiates an SSL/TLS handshake with a server. The handshake may be started
* after unencrypted data has been sent over the socket.
*/
static VALUE
ossl_ssl_connect(VALUE self)
{
ossl_ssl_setup(self);
return ossl_start_ssl(self, SSL_connect, "SSL_connect", Qfalse);
}
/*
* call-seq:
* ssl.connect_nonblock([options]) => self
*
* Initiates the SSL/TLS handshake as a client in non-blocking manner.
*
* # emulates blocking connect
* begin
* ssl.connect_nonblock
* rescue IO::WaitReadable
* IO.select([s2])
* retry
* rescue IO::WaitWritable
* IO.select(nil, [s2])
* retry
* end
*
* By specifying `exception: false`, the options hash allows you to indicate
* that connect_nonblock should not raise an IO::WaitReadable or
* IO::WaitWritable exception, but return the symbol :wait_readable or
* :wait_writable instead.
*/
static VALUE
ossl_ssl_connect_nonblock(int argc, VALUE *argv, VALUE self)
{
VALUE opts;
rb_scan_args(argc, argv, "0:", &opts);
ossl_ssl_setup(self);
return ossl_start_ssl(self, SSL_connect, "SSL_connect", opts);
}
/*
* call-seq:
* ssl.accept => self
*
* Waits for a SSL/TLS client to initiate a handshake. The handshake may be
* started after unencrypted data has been sent over the socket.
*/
static VALUE
ossl_ssl_accept(VALUE self)
{
ossl_ssl_setup(self);
return ossl_start_ssl(self, SSL_accept, "SSL_accept", Qfalse);
}
/*
* call-seq:
* ssl.accept_nonblock([options]) => self
*
* Initiates the SSL/TLS handshake as a server in non-blocking manner.
*
* # emulates blocking accept
* begin
* ssl.accept_nonblock
* rescue IO::WaitReadable
* IO.select([s2])
* retry
* rescue IO::WaitWritable
* IO.select(nil, [s2])
* retry
* end
*
* By specifying `exception: false`, the options hash allows you to indicate
* that accept_nonblock should not raise an IO::WaitReadable or
* IO::WaitWritable exception, but return the symbol :wait_readable or
* :wait_writable instead.
*/
static VALUE
ossl_ssl_accept_nonblock(int argc, VALUE *argv, VALUE self)
{
VALUE opts;
rb_scan_args(argc, argv, "0:", &opts);
ossl_ssl_setup(self);
return ossl_start_ssl(self, SSL_accept, "SSL_accept", opts);
}
static VALUE
ossl_ssl_read_internal(int argc, VALUE *argv, VALUE self, int nonblock)
{
SSL *ssl;
int ilen, nread = 0;
VALUE len, str;
rb_io_t *fptr;
VALUE opts = Qnil;
if (nonblock) {
rb_scan_args(argc, argv, "11:", &len, &str, &opts);
} else {
rb_scan_args(argc, argv, "11", &len, &str);
}
ilen = NUM2INT(len);
if(NIL_P(str)) str = rb_str_new(0, ilen);
else{
StringValue(str);
rb_str_modify(str);
rb_str_resize(str, ilen);
}
if(ilen == 0) return str;
GetSSL(self, ssl);
GetOpenFile(ossl_ssl_get_io(self), fptr);
if (ssl_started(ssl)) {
if(!nonblock && SSL_pending(ssl) <= 0)
rb_thread_wait_fd(FPTR_TO_FD(fptr));
for (;;){
nread = SSL_read(ssl, RSTRING_PTR(str), RSTRING_LENINT(str));
switch(ssl_get_error(ssl, nread)){
case SSL_ERROR_NONE:
goto end;
case SSL_ERROR_ZERO_RETURN:
if (no_exception_p(opts)) { return Qnil; }
rb_eof_error();
case SSL_ERROR_WANT_WRITE:
if (no_exception_p(opts)) { return sym_wait_writable; }
write_would_block(nonblock);
rb_io_wait_writable(FPTR_TO_FD(fptr));
continue;
case SSL_ERROR_WANT_READ:
if (no_exception_p(opts)) { return sym_wait_readable; }
read_would_block(nonblock);
rb_io_wait_readable(FPTR_TO_FD(fptr));
continue;
case SSL_ERROR_SYSCALL:
if(ERR_peek_error() == 0 && nread == 0) {
if (no_exception_p(opts)) { return Qnil; }
rb_eof_error();
}
rb_sys_fail(0);
default:
ossl_raise(eSSLError, "SSL_read");
}
}
}
else {
ID meth = nonblock ? rb_intern("read_nonblock") : rb_intern("sysread");
rb_warning("SSL session is not started yet.");
if (nonblock) {
return rb_funcall(ossl_ssl_get_io(self), meth, 3, len, str, opts);
} else {
return rb_funcall(ossl_ssl_get_io(self), meth, 2, len, str);
}
}
end:
rb_str_set_len(str, nread);
OBJ_TAINT(str);
return str;
}
/*
* call-seq:
* ssl.sysread(length) => string
* ssl.sysread(length, buffer) => buffer
*
* Reads +length+ bytes from the SSL connection. If a pre-allocated +buffer+
* is provided the data will be written into it.
*/
static VALUE
ossl_ssl_read(int argc, VALUE *argv, VALUE self)
{
return ossl_ssl_read_internal(argc, argv, self, 0);
}
/*
* call-seq:
* ssl.sysread_nonblock(length) => string
* ssl.sysread_nonblock(length, buffer) => buffer
* ssl.sysread_nonblock(length[, buffer [, opts]) => buffer
*
* A non-blocking version of #sysread. Raises an SSLError if reading would
* block. If "exception: false" is passed, this method returns a symbol of
* :wait_readable, :wait_writable, or nil, rather than raising an exception.
*
* Reads +length+ bytes from the SSL connection. If a pre-allocated +buffer+
* is provided the data will be written into it.
*/
static VALUE
ossl_ssl_read_nonblock(int argc, VALUE *argv, VALUE self)
{
return ossl_ssl_read_internal(argc, argv, self, 1);
}
static VALUE
ossl_ssl_write_internal(VALUE self, VALUE str, VALUE opts)
{
SSL *ssl;
int nwrite = 0;
rb_io_t *fptr;
int nonblock = opts != Qfalse;
StringValue(str);
GetSSL(self, ssl);
GetOpenFile(ossl_ssl_get_io(self), fptr);
if (ssl_started(ssl)) {
for (;;){
nwrite = SSL_write(ssl, RSTRING_PTR(str), RSTRING_LENINT(str));
switch(ssl_get_error(ssl, nwrite)){
case SSL_ERROR_NONE:
goto end;
case SSL_ERROR_WANT_WRITE:
if (no_exception_p(opts)) { return sym_wait_writable; }
write_would_block(nonblock);
rb_io_wait_writable(FPTR_TO_FD(fptr));
continue;
case SSL_ERROR_WANT_READ:
if (no_exception_p(opts)) { return sym_wait_readable; }
read_would_block(nonblock);
rb_io_wait_readable(FPTR_TO_FD(fptr));
continue;
case SSL_ERROR_SYSCALL:
if (errno) rb_sys_fail(0);
default:
ossl_raise(eSSLError, "SSL_write");
}
}
}
else {
ID id_syswrite = rb_intern("syswrite");
rb_warning("SSL session is not started yet.");
return rb_funcall(ossl_ssl_get_io(self), id_syswrite, 1, str);
}
end:
return INT2NUM(nwrite);
}
/*
* call-seq:
* ssl.syswrite(string) => Integer
*
* Writes +string+ to the SSL connection.
*/
static VALUE
ossl_ssl_write(VALUE self, VALUE str)
{
return ossl_ssl_write_internal(self, str, Qfalse);
}
/*
* call-seq:
* ssl.syswrite_nonblock(string) => Integer
*
* Writes +string+ to the SSL connection in a non-blocking manner. Raises an
* SSLError if writing would block.
*/
static VALUE
ossl_ssl_write_nonblock(int argc, VALUE *argv, VALUE self)
{
VALUE str, opts;
rb_scan_args(argc, argv, "1:", &str, &opts);
return ossl_ssl_write_internal(self, str, opts);
}
/*
* call-seq:
* ssl.stop => nil
*
* Sends "close notify" to the peer and tries to shut down the SSL connection
* gracefully.
*/
static VALUE
ossl_ssl_stop(VALUE self)
{
SSL *ssl;
GetSSL(self, ssl);
ossl_ssl_shutdown(ssl);
return Qnil;
}
/*
* call-seq:
* ssl.cert => cert or nil
*
* The X509 certificate for this socket endpoint.
*/
static VALUE
ossl_ssl_get_cert(VALUE self)
{
SSL *ssl;
X509 *cert = NULL;
GetSSL(self, ssl);
/*
* Is this OpenSSL bug? Should add a ref?
* TODO: Ask for.
*/
cert = SSL_get_certificate(ssl); /* NO DUPs => DON'T FREE. */
if (!cert) {
return Qnil;
}
return ossl_x509_new(cert);
}
/*
* call-seq:
* ssl.peer_cert => cert or nil
*
* The X509 certificate for this socket's peer.
*/
static VALUE
ossl_ssl_get_peer_cert(VALUE self)
{
SSL *ssl;
X509 *cert = NULL;
VALUE obj;
GetSSL(self, ssl);
cert = SSL_get_peer_certificate(ssl); /* Adds a ref => Safe to FREE. */
if (!cert) {
return Qnil;
}
obj = ossl_x509_new(cert);
X509_free(cert);
return obj;
}
/*
* call-seq:
* ssl.peer_cert_chain => [cert, ...] or nil
*
* The X509 certificate chain for this socket's peer.
*/
static VALUE
ossl_ssl_get_peer_cert_chain(VALUE self)
{
SSL *ssl;
STACK_OF(X509) *chain;
X509 *cert;
VALUE ary;
int i, num;
GetSSL(self, ssl);
chain = SSL_get_peer_cert_chain(ssl);
if(!chain) return Qnil;
num = sk_X509_num(chain);
ary = rb_ary_new2(num);
for (i = 0; i < num; i++){
cert = sk_X509_value(chain, i);
rb_ary_push(ary, ossl_x509_new(cert));
}
return ary;
}
/*
* call-seq:
* ssl.ssl_version => String
*
* Returns a String representing the SSL/TLS version that was negotiated
* for the connection, for example "TLSv1.2".
*/
static VALUE
ossl_ssl_get_version(VALUE self)
{
SSL *ssl;
GetSSL(self, ssl);
return rb_str_new2(SSL_get_version(ssl));
}
/*
* call-seq:
* ssl.cipher => [name, version, bits, alg_bits]
*
* The cipher being used for the current connection
*/
static VALUE
ossl_ssl_get_cipher(VALUE self)
{
SSL *ssl;
SSL_CIPHER *cipher;
GetSSL(self, ssl);
cipher = (SSL_CIPHER *)SSL_get_current_cipher(ssl);
return ossl_ssl_cipher_to_ary(cipher);
}
/*
* call-seq:
* ssl.state => string
*
* A description of the current connection state.
*/
static VALUE
ossl_ssl_get_state(VALUE self)
{
SSL *ssl;
VALUE ret;
GetSSL(self, ssl);
ret = rb_str_new2(SSL_state_string(ssl));
if (ruby_verbose) {
rb_str_cat2(ret, ": ");
rb_str_cat2(ret, SSL_state_string_long(ssl));
}
return ret;
}
/*
* call-seq:
* ssl.pending => Integer
*
* The number of bytes that are immediately available for reading
*/
static VALUE
ossl_ssl_pending(VALUE self)
{
SSL *ssl;
GetSSL(self, ssl);
return INT2NUM(SSL_pending(ssl));
}
/*
* call-seq:
* ssl.session_reused? -> true | false
*
* Returns true if a reused session was negotiated during the handshake.
*/
static VALUE
ossl_ssl_session_reused(VALUE self)
{
SSL *ssl;
GetSSL(self, ssl);
return SSL_session_reused(ssl) ? Qtrue : Qfalse;
}
/*
* call-seq:
* ssl.session = session -> session
*
* Sets the Session to be used when the connection is established.
*/
static VALUE
ossl_ssl_set_session(VALUE self, VALUE arg1)
{
SSL *ssl;
SSL_SESSION *sess;
GetSSL(self, ssl);
SafeGetSSLSession(arg1, sess);
if (SSL_set_session(ssl, sess) != 1)
ossl_raise(eSSLError, "SSL_set_session");
return arg1;
}
/*
* call-seq:
* ssl.hostname = hostname -> hostname
*
* Sets the server hostname used for SNI. This needs to be set before
* SSLSocket#connect.
*/
#ifdef HAVE_SSL_SET_TLSEXT_HOST_NAME
static VALUE
ossl_ssl_set_hostname(VALUE self, VALUE arg)
{
SSL *ssl;
char *hostname = NULL;
GetSSL(self, ssl);
if (!NIL_P(arg))
hostname = StringValueCStr(arg);
if (!SSL_set_tlsext_host_name(ssl, hostname))
ossl_raise(eSSLError, NULL);
/* for SSLSocket#hostname */
ossl_ssl_set_hostname_v(self, arg);
return arg;
}
#endif
/*
* call-seq:
* ssl.verify_result => Integer
*
* Returns the result of the peer certificates verification. See verify(1)
* for error values and descriptions.
*
* If no peer certificate was presented X509_V_OK is returned.
*/
static VALUE
ossl_ssl_get_verify_result(VALUE self)
{
SSL *ssl;
GetSSL(self, ssl);
return INT2FIX(SSL_get_verify_result(ssl));
}
/*
* call-seq:
* ssl.client_ca => [x509name, ...]
*
* Returns the list of client CAs. Please note that in contrast to
* SSLContext#client_ca= no array of X509::Certificate is returned but
* X509::Name instances of the CA's subject distinguished name.
*
* In server mode, returns the list set by SSLContext#client_ca=.
* In client mode, returns the list of client CAs sent from the server.
*/
static VALUE
ossl_ssl_get_client_ca_list(VALUE self)
{
SSL *ssl;
STACK_OF(X509_NAME) *ca;
GetSSL(self, ssl);
ca = SSL_get_client_CA_list(ssl);
return ossl_x509name_sk2ary(ca);
}
# ifdef HAVE_SSL_CTX_SET_NEXT_PROTO_SELECT_CB
/*
* call-seq:
* ssl.npn_protocol => String
*
* Returns the protocol string that was finally selected by the client
* during the handshake.
*/
static VALUE
ossl_ssl_npn_protocol(VALUE self)
{
SSL *ssl;
const unsigned char *out;
unsigned int outlen;
GetSSL(self, ssl);
SSL_get0_next_proto_negotiated(ssl, &out, &outlen);
if (!outlen)
return Qnil;
else
return rb_str_new((const char *) out, outlen);
}
# endif
# ifdef HAVE_SSL_CTX_SET_ALPN_SELECT_CB
/*
* call-seq:
* ssl.alpn_protocol => String
*
* Returns the ALPN protocol string that was finally selected by the client
* during the handshake.
*/
static VALUE
ossl_ssl_alpn_protocol(VALUE self)
{
SSL *ssl;
const unsigned char *out;
unsigned int outlen;
GetSSL(self, ssl);
SSL_get0_alpn_selected(ssl, &out, &outlen);
if (!outlen)
return Qnil;
else
return rb_str_new((const char *) out, outlen);
}
# endif
# ifdef HAVE_SSL_GET_SERVER_TMP_KEY
/*
* call-seq:
* ssl.tmp_key => PKey or nil
*
* Returns the ephemeral key used in case of forward secrecy cipher
*/
static VALUE
ossl_ssl_tmp_key(VALUE self)
{
SSL *ssl;
EVP_PKEY *key;
GetSSL(self, ssl);
if (!SSL_get_server_tmp_key(ssl, &key))
return Qnil;
return ossl_pkey_new(key);
}
# endif /* defined(HAVE_SSL_GET_SERVER_TMP_KEY) */
#endif /* !defined(OPENSSL_NO_SOCK) */
void
Init_ossl_ssl(void)
{
int i;
VALUE ary;
#if 0
mOSSL = rb_define_module("OpenSSL"); /* let rdoc know about mOSSL */
#endif
ID_callback_state = rb_intern("@callback_state");
ossl_ssl_ex_vcb_idx = SSL_get_ex_new_index(0,(void *)"ossl_ssl_ex_vcb_idx",0,0,0);
ossl_ssl_ex_store_p = SSL_get_ex_new_index(0,(void *)"ossl_ssl_ex_store_p",0,0,0);
ossl_ssl_ex_ptr_idx = SSL_get_ex_new_index(0,(void *)"ossl_ssl_ex_ptr_idx",0,0,0);
/* Document-module: OpenSSL::SSL
*
* Use SSLContext to set up the parameters for a TLS (former SSL)
* connection. Both client and server TLS connections are supported,
* SSLSocket and SSLServer may be used in conjunction with an instance
* of SSLContext to set up connections.
*/
mSSL = rb_define_module_under(mOSSL, "SSL");
/* Document-module: OpenSSL::ExtConfig
*
* This module contains configuration information about the SSL extension,
* for example if socket support is enabled, or the host name TLS extension
* is enabled. Constants in this module will always be defined, but contain
* `true` or `false` values depending on the configuration of your OpenSSL
* installation.
*/
mSSLExtConfig = rb_define_module_under(mOSSL, "ExtConfig");
/* Document-class: OpenSSL::SSL::SSLError
*
* Generic error class raised by SSLSocket and SSLContext.
*/
eSSLError = rb_define_class_under(mSSL, "SSLError", eOSSLError);
eSSLErrorWaitReadable = rb_define_class_under(mSSL, "SSLErrorWaitReadable", eSSLError);
rb_include_module(eSSLErrorWaitReadable, rb_mWaitReadable);
eSSLErrorWaitWritable = rb_define_class_under(mSSL, "SSLErrorWaitWritable", eSSLError);
rb_include_module(eSSLErrorWaitWritable, rb_mWaitWritable);
Init_ossl_ssl_session();
/* Document-class: OpenSSL::SSL::SSLContext
*
* An SSLContext is used to set various options regarding certificates,
* algorithms, verification, session caching, etc. The SSLContext is
* used to create an SSLSocket.
*
* All attributes must be set before creating an SSLSocket as the
* SSLContext will be frozen afterward.
*
* The following attributes are available but don't show up in rdoc:
* * ssl_version, cert, key, client_ca, ca_file, ca_path, timeout,
* * verify_mode, verify_depth client_cert_cb, tmp_dh_callback,
* * session_id_context, session_add_cb, session_new_cb, session_remove_cb
*/
cSSLContext = rb_define_class_under(mSSL, "SSLContext", rb_cObject);
rb_define_alloc_func(cSSLContext, ossl_sslctx_s_alloc);
/*
* Context certificate
*/
rb_attr(cSSLContext, rb_intern("cert"), 1, 1, Qfalse);
/*
* Context private key
*/
rb_attr(cSSLContext, rb_intern("key"), 1, 1, Qfalse);
/*
* A certificate or Array of certificates that will be sent to the client.
*/
rb_attr(cSSLContext, rb_intern("client_ca"), 1, 1, Qfalse);
/*
* The path to a file containing a PEM-format CA certificate
*/
rb_attr(cSSLContext, rb_intern("ca_file"), 1, 1, Qfalse);
/*
* The path to a directory containing CA certificates in PEM format.
*
* Files are looked up by subject's X509 name's hash value.
*/
rb_attr(cSSLContext, rb_intern("ca_path"), 1, 1, Qfalse);
/*
* Maximum session lifetime.
*/
rb_attr(cSSLContext, rb_intern("timeout"), 1, 1, Qfalse);
/*
* Session verification mode.
*
* Valid modes are VERIFY_NONE, VERIFY_PEER, VERIFY_CLIENT_ONCE,
* VERIFY_FAIL_IF_NO_PEER_CERT and defined on OpenSSL::SSL
*/
rb_attr(cSSLContext, rb_intern("verify_mode"), 1, 1, Qfalse);
/*
* Number of CA certificates to walk when verifying a certificate chain.
*/
rb_attr(cSSLContext, rb_intern("verify_depth"), 1, 1, Qfalse);
/*
* A callback for additional certificate verification. The callback is
* invoked for each certificate in the chain.
*
* The callback is invoked with two values. +preverify_ok+ indicates
* indicates if the verification was passed (true) or not (false).
* +store_context+ is an OpenSSL::X509::StoreContext containing the
* context used for certificate verification.
*
* If the callback returns false verification is stopped.
*/
rb_attr(cSSLContext, rb_intern("verify_callback"), 1, 1, Qfalse);
/*
* An OpenSSL::X509::Store used for certificate verification
*/
rb_attr(cSSLContext, rb_intern("cert_store"), 1, 1, Qfalse);
/*
* An Array of extra X509 certificates to be added to the certificate
* chain.
*/
rb_attr(cSSLContext, rb_intern("extra_chain_cert"), 1, 1, Qfalse);
/*
* A callback invoked when a client certificate is requested by a server
* and no certificate has been set.
*
* The callback is invoked with a Session and must return an Array
* containing an OpenSSL::X509::Certificate and an OpenSSL::PKey. If any
* other value is returned the handshake is suspended.
*/
rb_attr(cSSLContext, rb_intern("client_cert_cb"), 1, 1, Qfalse);
#if !defined(OPENSSL_NO_EC) && defined(HAVE_SSL_CTX_SET_TMP_ECDH_CALLBACK)
/*
* A callback invoked when ECDH parameters are required.
*
* The callback is invoked with the Session for the key exchange, an
* flag indicating the use of an export cipher and the keylength
* required.
*
* The callback is deprecated. This does not work with recent versions of
* OpenSSL. Use OpenSSL::SSL::SSLContext#ecdh_curves= instead.
*/
rb_attr(cSSLContext, rb_intern("tmp_ecdh_callback"), 1, 1, Qfalse);
#endif
/*
* Sets the context in which a session can be reused. This allows
* sessions for multiple applications to be distinguished, for example, by
* name.
*/
rb_attr(cSSLContext, rb_intern("session_id_context"), 1, 1, Qfalse);
/*
* A callback invoked on a server when a session is proposed by the client
* but the session could not be found in the server's internal cache.
*
* The callback is invoked with the SSLSocket and session id. The
* callback may return a Session from an external cache.
*/
rb_attr(cSSLContext, rb_intern("session_get_cb"), 1, 1, Qfalse);
/*
* A callback invoked when a new session was negotiated.
*
* The callback is invoked with an SSLSocket. If false is returned the
* session will be removed from the internal cache.
*/
rb_attr(cSSLContext, rb_intern("session_new_cb"), 1, 1, Qfalse);
/*
* A callback invoked when a session is removed from the internal cache.
*
* The callback is invoked with an SSLContext and a Session.
*/
rb_attr(cSSLContext, rb_intern("session_remove_cb"), 1, 1, Qfalse);
#ifdef HAVE_SSL_SET_TLSEXT_HOST_NAME
rb_define_const(mSSLExtConfig, "HAVE_TLSEXT_HOST_NAME", Qtrue);
#else
rb_define_const(mSSLExtConfig, "HAVE_TLSEXT_HOST_NAME", Qfalse);
#endif
#ifdef TLS_DH_anon_WITH_AES_256_GCM_SHA384
rb_define_const(mSSLExtConfig, "TLS_DH_anon_WITH_AES_256_GCM_SHA384", Qtrue);
#else
rb_define_const(mSSLExtConfig, "TLS_DH_anon_WITH_AES_256_GCM_SHA384", Qfalse);
#endif
/*
* A callback invoked whenever a new handshake is initiated. May be used
* to disable renegotiation entirely.
*
* The callback is invoked with the active SSLSocket. The callback's
* return value is irrelevant, normal return indicates "approval" of the
* renegotiation and will continue the process. To forbid renegotiation
* and to cancel the process, an Error may be raised within the callback.
*
* === Disable client renegotiation
*
* When running a server, it is often desirable to disable client
* renegotiation entirely. You may use a callback as follows to implement
* this feature:
*
* num_handshakes = 0
* ctx.renegotiation_cb = lambda do |ssl|
* num_handshakes += 1
* raise RuntimeError.new("Client renegotiation disabled") if num_handshakes > 1
* end
*/
rb_attr(cSSLContext, rb_intern("renegotiation_cb"), 1, 1, Qfalse);
#ifdef HAVE_SSL_CTX_SET_NEXT_PROTO_SELECT_CB
/*
* An Enumerable of Strings. Each String represents a protocol to be
* advertised as the list of supported protocols for Next Protocol
* Negotiation. Supported in OpenSSL 1.0.1 and higher. Has no effect
* on the client side. If not set explicitly, the NPN extension will
* not be sent by the server in the handshake.
*
* === Example
*
* ctx.npn_protocols = ["http/1.1", "spdy/2"]
*/
rb_attr(cSSLContext, rb_intern("npn_protocols"), 1, 1, Qfalse);
/*
* A callback invoked on the client side when the client needs to select
* a protocol from the list sent by the server. Supported in OpenSSL 1.0.1
* and higher. The client MUST select a protocol of those advertised by
* the server. If none is acceptable, raising an error in the callback
* will cause the handshake to fail. Not setting this callback explicitly
* means not supporting the NPN extension on the client - any protocols
* advertised by the server will be ignored.
*
* === Example
*
* ctx.npn_select_cb = lambda do |protocols|
* #inspect the protocols and select one
* protocols.first
* end
*/
rb_attr(cSSLContext, rb_intern("npn_select_cb"), 1, 1, Qfalse);
#endif
#ifdef HAVE_SSL_CTX_SET_ALPN_SELECT_CB
/*
* An Enumerable of Strings. Each String represents a protocol to be
* advertised as the list of supported protocols for Application-Layer Protocol
* Negotiation. Supported in OpenSSL 1.0.1 and higher. Has no effect
* on the client side. If not set explicitly, the NPN extension will
* not be sent by the server in the handshake.
*
* === Example
*
* ctx.alpn_protocols = ["http/1.1", "spdy/2", "h2"]
*/
rb_attr(cSSLContext, rb_intern("alpn_protocols"), 1, 1, Qfalse);
/*
* A callback invoked on the server side when the server needs to select
* a protocol from the list sent by the client. Supported in OpenSSL 1.0.2
* and higher. The server MUST select a protocol of those advertised by
* the client. If none is acceptable, raising an error in the callback
* will cause the handshake to fail. Not setting this callback explicitly
* means not supporting the ALPN extension on the client - any protocols
* advertised by the server will be ignored.
*
* === Example
*
* ctx.alpn_select_cb = lambda do |protocols|
* #inspect the protocols and select one
* protocols.first
* end
*/
rb_attr(cSSLContext, rb_intern("alpn_select_cb"), 1, 1, Qfalse);
#endif
rb_define_alias(cSSLContext, "ssl_timeout", "timeout");
rb_define_alias(cSSLContext, "ssl_timeout=", "timeout=");
rb_define_method(cSSLContext, "ssl_version=", ossl_sslctx_set_ssl_version, 1);
rb_define_method(cSSLContext, "ciphers", ossl_sslctx_get_ciphers, 0);
rb_define_method(cSSLContext, "ciphers=", ossl_sslctx_set_ciphers, 1);
rb_define_method(cSSLContext, "ecdh_curves=", ossl_sslctx_set_ecdh_curves, 1);
rb_define_method(cSSLContext, "security_level", ossl_sslctx_get_security_level, 0);
rb_define_method(cSSLContext, "security_level=", ossl_sslctx_set_security_level, 1);
rb_define_method(cSSLContext, "setup", ossl_sslctx_setup, 0);
/*
* No session caching for client or server
*/
rb_define_const(cSSLContext, "SESSION_CACHE_OFF", LONG2FIX(SSL_SESS_CACHE_OFF));
/*
* Client sessions are added to the session cache
*/
rb_define_const(cSSLContext, "SESSION_CACHE_CLIENT", LONG2FIX(SSL_SESS_CACHE_CLIENT)); /* doesn't actually do anything in 0.9.8e */
/*
* Server sessions are added to the session cache
*/
rb_define_const(cSSLContext, "SESSION_CACHE_SERVER", LONG2FIX(SSL_SESS_CACHE_SERVER));
/*
* Both client and server sessions are added to the session cache
*/
rb_define_const(cSSLContext, "SESSION_CACHE_BOTH", LONG2FIX(SSL_SESS_CACHE_BOTH)); /* no different than CACHE_SERVER in 0.9.8e */
/*
* Normally the session cache is checked for expired sessions every 255
* connections. Since this may lead to a delay that cannot be controlled,
* the automatic flushing may be disabled and #flush_sessions can be
* called explicitly.
*/
rb_define_const(cSSLContext, "SESSION_CACHE_NO_AUTO_CLEAR", LONG2FIX(SSL_SESS_CACHE_NO_AUTO_CLEAR));
/*
* Always perform external lookups of sessions even if they are in the
* internal cache.
*
* This flag has no effect on clients
*/
rb_define_const(cSSLContext, "SESSION_CACHE_NO_INTERNAL_LOOKUP", LONG2FIX(SSL_SESS_CACHE_NO_INTERNAL_LOOKUP));
/*
* Never automatically store sessions in the internal store.
*/
rb_define_const(cSSLContext, "SESSION_CACHE_NO_INTERNAL_STORE", LONG2FIX(SSL_SESS_CACHE_NO_INTERNAL_STORE));
/*
* Enables both SESSION_CACHE_NO_INTERNAL_LOOKUP and
* SESSION_CACHE_NO_INTERNAL_STORE.
*/
rb_define_const(cSSLContext, "SESSION_CACHE_NO_INTERNAL", LONG2FIX(SSL_SESS_CACHE_NO_INTERNAL));
rb_define_method(cSSLContext, "session_add", ossl_sslctx_session_add, 1);
rb_define_method(cSSLContext, "session_remove", ossl_sslctx_session_remove, 1);
rb_define_method(cSSLContext, "session_cache_mode", ossl_sslctx_get_session_cache_mode, 0);
rb_define_method(cSSLContext, "session_cache_mode=", ossl_sslctx_set_session_cache_mode, 1);
rb_define_method(cSSLContext, "session_cache_size", ossl_sslctx_get_session_cache_size, 0);
rb_define_method(cSSLContext, "session_cache_size=", ossl_sslctx_set_session_cache_size, 1);
rb_define_method(cSSLContext, "session_cache_stats", ossl_sslctx_get_session_cache_stats, 0);
rb_define_method(cSSLContext, "flush_sessions", ossl_sslctx_flush_sessions, -1);
rb_define_method(cSSLContext, "options", ossl_sslctx_get_options, 0);
rb_define_method(cSSLContext, "options=", ossl_sslctx_set_options, 1);
ary = rb_ary_new2(numberof(ossl_ssl_method_tab));
for (i = 0; i < numberof(ossl_ssl_method_tab); i++) {
rb_ary_push(ary, ID2SYM(rb_intern(ossl_ssl_method_tab[i].name)));
}
rb_obj_freeze(ary);
/* The list of available SSL/TLS methods */
rb_define_const(cSSLContext, "METHODS", ary);
/*
* Document-class: OpenSSL::SSL::SSLSocket
*
* The following attributes are available but don't show up in rdoc.
* * io, context, sync_close
*
*/
cSSLSocket = rb_define_class_under(mSSL, "SSLSocket", rb_cObject);
#ifdef OPENSSL_NO_SOCK
rb_define_const(mSSLExtConfig, "OPENSSL_NO_SOCK", Qtrue);
rb_define_method(cSSLSocket, "initialize", rb_f_notimplement, -1);
#else
rb_define_const(mSSLExtConfig, "OPENSSL_NO_SOCK", Qfalse);
rb_define_alloc_func(cSSLSocket, ossl_ssl_s_alloc);
rb_define_method(cSSLSocket, "initialize", ossl_ssl_initialize, -1);
rb_define_method(cSSLSocket, "connect", ossl_ssl_connect, 0);
rb_define_method(cSSLSocket, "connect_nonblock", ossl_ssl_connect_nonblock, -1);
rb_define_method(cSSLSocket, "accept", ossl_ssl_accept, 0);
rb_define_method(cSSLSocket, "accept_nonblock", ossl_ssl_accept_nonblock, -1);
rb_define_method(cSSLSocket, "sysread", ossl_ssl_read, -1);
rb_define_private_method(cSSLSocket, "sysread_nonblock", ossl_ssl_read_nonblock, -1);
rb_define_method(cSSLSocket, "syswrite", ossl_ssl_write, 1);
rb_define_private_method(cSSLSocket, "syswrite_nonblock", ossl_ssl_write_nonblock, -1);
rb_define_private_method(cSSLSocket, "stop", ossl_ssl_stop, 0);
rb_define_method(cSSLSocket, "cert", ossl_ssl_get_cert, 0);
rb_define_method(cSSLSocket, "peer_cert", ossl_ssl_get_peer_cert, 0);
rb_define_method(cSSLSocket, "peer_cert_chain", ossl_ssl_get_peer_cert_chain, 0);
rb_define_method(cSSLSocket, "ssl_version", ossl_ssl_get_version, 0);
rb_define_method(cSSLSocket, "cipher", ossl_ssl_get_cipher, 0);
rb_define_method(cSSLSocket, "state", ossl_ssl_get_state, 0);
rb_define_method(cSSLSocket, "pending", ossl_ssl_pending, 0);
rb_define_method(cSSLSocket, "session_reused?", ossl_ssl_session_reused, 0);
/* implementation of OpenSSL::SSL::SSLSocket#session is in lib/openssl/ssl.rb */
rb_define_method(cSSLSocket, "session=", ossl_ssl_set_session, 1);
rb_define_method(cSSLSocket, "verify_result", ossl_ssl_get_verify_result, 0);
rb_define_method(cSSLSocket, "client_ca", ossl_ssl_get_client_ca_list, 0);
#ifdef HAVE_SSL_SET_TLSEXT_HOST_NAME
/* #hostname is defined in lib/openssl/ssl.rb */
rb_define_method(cSSLSocket, "hostname=", ossl_ssl_set_hostname, 1);
#endif
# ifdef HAVE_SSL_GET_SERVER_TMP_KEY
rb_define_method(cSSLSocket, "tmp_key", ossl_ssl_tmp_key, 0);
# endif
# ifdef HAVE_SSL_CTX_SET_ALPN_SELECT_CB
rb_define_method(cSSLSocket, "alpn_protocol", ossl_ssl_alpn_protocol, 0);
# endif
# ifdef HAVE_SSL_CTX_SET_NEXT_PROTO_SELECT_CB
rb_define_method(cSSLSocket, "npn_protocol", ossl_ssl_npn_protocol, 0);
# endif
#endif
#define ossl_ssl_def_const(x) rb_define_const(mSSL, #x, LONG2NUM(SSL_##x))
ossl_ssl_def_const(VERIFY_NONE);
ossl_ssl_def_const(VERIFY_PEER);
ossl_ssl_def_const(VERIFY_FAIL_IF_NO_PEER_CERT);
ossl_ssl_def_const(VERIFY_CLIENT_ONCE);
/* Introduce constants included in OP_ALL. These constants are mostly for
* unset some bits in OP_ALL such as;
* ctx.options = OP_ALL & ~OP_DONT_INSERT_EMPTY_FRAGMENTS
*/
ossl_ssl_def_const(OP_MICROSOFT_SESS_ID_BUG);
ossl_ssl_def_const(OP_NETSCAPE_CHALLENGE_BUG);
ossl_ssl_def_const(OP_NETSCAPE_REUSE_CIPHER_CHANGE_BUG);
ossl_ssl_def_const(OP_SSLREF2_REUSE_CERT_TYPE_BUG);
ossl_ssl_def_const(OP_MICROSOFT_BIG_SSLV3_BUFFER);
ossl_ssl_def_const(OP_MSIE_SSLV2_RSA_PADDING);
ossl_ssl_def_const(OP_SSLEAY_080_CLIENT_DH_BUG);
ossl_ssl_def_const(OP_TLS_D5_BUG);
ossl_ssl_def_const(OP_TLS_BLOCK_PADDING_BUG);
ossl_ssl_def_const(OP_DONT_INSERT_EMPTY_FRAGMENTS);
ossl_ssl_def_const(OP_ALL);
ossl_ssl_def_const(OP_NO_SESSION_RESUMPTION_ON_RENEGOTIATION);
ossl_ssl_def_const(OP_SINGLE_ECDH_USE);
ossl_ssl_def_const(OP_SINGLE_DH_USE);
ossl_ssl_def_const(OP_EPHEMERAL_RSA);
ossl_ssl_def_const(OP_CIPHER_SERVER_PREFERENCE);
ossl_ssl_def_const(OP_TLS_ROLLBACK_BUG);
ossl_ssl_def_const(OP_NO_SSLv2);
ossl_ssl_def_const(OP_NO_SSLv3);
ossl_ssl_def_const(OP_NO_TLSv1);
#if defined(SSL_OP_NO_TLSv1_1)
ossl_ssl_def_const(OP_NO_TLSv1_1);
#endif
#if defined(SSL_OP_NO_TLSv1_2)
ossl_ssl_def_const(OP_NO_TLSv1_2);
#endif
#if defined(SSL_OP_NO_TICKET)
ossl_ssl_def_const(OP_NO_TICKET);
#endif
#if defined(SSL_OP_NO_COMPRESSION)
ossl_ssl_def_const(OP_NO_COMPRESSION);
#endif
ossl_ssl_def_const(OP_PKCS1_CHECK_1);
ossl_ssl_def_const(OP_PKCS1_CHECK_2);
ossl_ssl_def_const(OP_NETSCAPE_CA_DN_BUG);
ossl_ssl_def_const(OP_NETSCAPE_DEMO_CIPHER_CHANGE_BUG);
#undef rb_intern
sym_exception = ID2SYM(rb_intern("exception"));
sym_wait_readable = ID2SYM(rb_intern("wait_readable"));
sym_wait_writable = ID2SYM(rb_intern("wait_writable"));
}
![[top]](../icons/top.png){kind=icon}
![[bottom]](../icons/n_bottom.png){kind=icon}